-- *****************************************************************************
-- Juniper-ATM-CONF
--
-- SNMP Agent Capabilities definitions for the ATM MIBs.
--
-- Copyright (c) 2001, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002-2005 Juniper Networks, Inc.
-- All rights reserved.
-- *****************************************************************************Juniper-ATM-CONF DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITYFROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
juniAgents
FROM Juniper-Agents;juniAtmAgent MODULE-IDENTITYLAST-UPDATED"200508171726Z"-- 17-Aug-05 01:26 PM EDTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"DESCRIPTION"Juniper-UNI-ATM-MIB:
The agent capabilities definitions for the ATM component of the SNMP
agent in the Juniper E-series family of products."-- Revision HistoryREVISION"200508171726Z"-- 17-Aug-05 01:26 PM EDT - JUNOSe 7.3DESCRIPTION"Juniper-UNI-ATM-MIB:
Removed SVC support.
ATM2-MIB:
Removed SVC support."REVISION"200502172315Z"-- 17-Feb-05 06:15 PM EST - JUNOSe 7.1DESCRIPTION"Juniper-UNI-ATM-MIB:
Added circuit OAM support to the ATM VCC end point agent capabilities."REVISION"200401061953Z"-- 06-Jan-04 02:53 PM EST - JUNOSe 5.3DESCRIPTION"Added support to export the subinterface description to the line
cards."REVISION"200311071457Z"-- 07-Nov-03 09:57 AM EST - JUNOSe 5.2DESCRIPTION"ATM2-MIB:
Updated from an Internet Draft to a Proposed Standard (RFC 3606).
Juniper-UNI-ATM-MIB:
Added ATM sub-interface location support."REVISION"200305081757Z"-- 08-May-03 01:57 PM EDT - JUNOSe 5.1DESCRIPTION"Juniper-UNI-ATM-MIB:
Added ATM F4 OAM circuits management and ATM VP description support."REVISION"200209061654Z"-- 06-Sep-02 12:54 PM EDT - JUNOSe 5.0DESCRIPTION"Juniper-UNI-ATM-MIB:
Replaced Unisphere names with Juniper names."REVISION"200208091415Z"-- 09-Aug-02 10:15 AM EDT - JUNOSe 4.1DESCRIPTION"ATM2-MIB:
Added support for the atmSigStatTable, the atmAal5VclStatTable and the
atmInterfaceExtTable.
Juniper-UNI-ATM-MIB:
Added receive bandwith support to CAC.
Added E164 public addressing support."REVISION"200201291518Z"-- 29-Jan-02 10:18 AM EST - JUNOSe 4.0
DESCRIPTION"Juniper-UNI-ATM-MIB:
Added ATM switched virtual connection (SVC) support to the VCC end
point capabilities."REVISION"200201241416Z"-- 24-Jan-02 09:16 AM EST - JUNOSe 3.4DESCRIPTION"Juniper-UNI-ATM-MIB:
Added support for ATM connection admission control (CAC) to the VCC end
point capabilities."REVISION"200112141951Z"-- 14-Dec-01 02:51 PM EST - JUNOSe 3.3DESCRIPTION"Juniper-UNI-ATM-MIB:
Added ATM traffic shaping capabilities."REVISION"200105231612Z"-- 23-May-01 12:12 PM EDT - JUNOSe 3.2DESCRIPTION"The initial release of this management information module."::={ juniAgents 3}-- *****************************************************************************
-- ATM VCC end point agent capabilities
-- *****************************************************************************juniAtmVccEndPointAgent OBJECTIDENTIFIER::={ juniAtmAgent 1}juniAtmVccEndPointAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 3.0 and 3.1 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilities became obsolete when new objects were added to the
juniAtmSubIfGroup and support for the atmfM4IfLoopbackLocationCode
object was added."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup,
juniAtmAal5Group,
juniAtmSubIfGroup }::={ juniAtmVccEndPointAgent 1}juniAtmVccEndPointAgentV2 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 2 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 3.2 and JUNOSe 3.3 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilities became obsolete when support was added to the
Juniper-UNI-ATM-MIB for connection admission control (CAC)."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."
VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-only
DESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup2,
juniAtmAal5Group,
juniAtmSubIfGroup2,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup }::={ juniAtmVccEndPointAgent 2}juniAtmVccEndPointAgentV3 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 3 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 3.4 and subsequent 3.x system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilities became obsolete when support was added to the
Juniper-UNI-ATM-MIB for switched virtual connection (SVC)."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implemented
DESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup3,
juniAtmAal5Group,
juniAtmSubIfGroup2,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup }::={ juniAtmVccEndPointAgent 3}juniAtmVccEndPointAgentV4 AGENT-CAPABILITIESPRODUCT-RELEASE
"Version 4 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 4.0 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilitie became obsolete when CAC recieve bandwith and E164
public addressing objects were added."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implemented
DESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implemented
DESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup4,
juniAtmAal5Group,
juniAtmSubIfGroup3,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup }::={ juniAtmVccEndPointAgent 4}juniAtmVccEndPointAgentV5 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 5 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 4.1 thru 5.0 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilitie became obsolete when F4 flow OAM circuits and ATM VP
description objects were added to the Juniper-UNI-ATM-MIB."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."
VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION
"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION
"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup5,
juniAtmAal5Group,
juniAtmSubIfGroup4,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2 }::={ juniAtmVccEndPointAgent 5}juniAtmVccEndPointAgentV6 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 6 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was
supported in JUNOSe 5.1 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilitie became obsolete when ATM sub-interface location
support was added to the Juniper-UNI-ATM-MIB."
SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implemented
DESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."
SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implemented
DESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."
VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup6,
juniAtmAal5Group,
juniAtmSubIfGroup4,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup }::={ juniAtmVccEndPointAgent 6}juniAtmVccEndPointAgentV7 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 7 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was supported
in JUNOSe 5.2 system release."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in JUNOSe.
These capabilitie became obsolete when support was added to export
ATM sub-interface descriptions to the line cards."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."
VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION
"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup6,
juniAtmAal5Group,
juniAtmSubIfGroup4,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup,
juniAtmLocationGroup }::={ juniAtmVccEndPointAgent 7}juniAtmVccEndPointAgentV8 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 8 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was supported
in JUNOSe 5.3 and 6.0 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in
JUNOSe. These capabilities became obsolete when ATM bulk configuration
profile override was introduced."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }
VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }
VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implemented
DESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implemented
DESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION
"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup6,
juniAtmAal5Group,
juniAtmSubIfGroup5,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup,
juniAtmLocationGroup }::={ juniAtmVccEndPointAgent 8}juniAtmVccEndPointAgentV9 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 9 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent was supported
in JUNOSe 6.1 system release."STATUSobsoleteDESCRIPTION
"The MIBs supported by the SNMP agent for the ATM application in
JUNOSe. These capabilities became obsolete when ATM bulk configuration
profile override was introduced."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."
VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implemented
DESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."
VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implemented
DESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."
VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup7,
juniAtmAal5Group,
juniAtmSubIfGroup5,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup,
juniAtmLocationGroup }
::={ juniAtmVccEndPointAgent 9}juniAtmVccEndPointAgentV10 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 10 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent is supported
in JUNOSe 7.0 and subsequent system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in
JUNOSe.These capabilities became obsolete when ATM VP Statistics
was introduced."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implemented
DESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."
VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implemented
DESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."
VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup8,
juniAtmAal5Group,
juniAtmSubIfGroup5,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup,
juniAtmLocationGroup }::={ juniAtmVccEndPointAgent 10}juniAtmVccEndPointAgentV11 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 11 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent is supported
in JUNOSe 7.1 and 7.2 system releases."STATUSobsoleteDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in
JUNOSe. These capabilities became obsolete when SVC support
was removed."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION
"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-only
DESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."
VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."VARIATION atmVclGenSigDescrIndex
ACCESSnot-implemented
DESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."
VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup8,
juniAtmAal5Group,
juniAtmSubIfGroup6,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup2,
juniAtmLocationGroup,
juniAtmVpStatsGroup }::={ juniAtmVccEndPointAgent 11}
juniAtmVccEndPointAgentV12 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 12 of the ATM VCC end point agent subcomponent of the JUNOSe
SNMP agent. This version of the ATM end point subcomponent is supported
in JUNOSe 7.3 and subsequent system releases."STATUScurrentDESCRIPTION"The MIBs supported by the SNMP agent for the ATM application in
JUNOSe."SUPPORTS ATM-MIB
INCLUDES{
atmInterfaceTCGroup,
aal5VccGroup,
atmInterfaceConfGroup2,
atmVccTerminationGroup2 }VARIATION atmVclAdminStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclReceiveTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclTransmitTrafficDescrIndex
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVccAalType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclRowStatus
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclCastType
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."VARIATION atmVclConnKind
ACCESSread-onlyDESCRIPTION"The atmVccTerminationGroup2 is not used for configuring VCCs.
Use the Juniper-UNI-ATM-MIB."SUPPORTS ATM2-MIB
INCLUDES{
atmCommonGroup,
atmHostGroup }VARIATION atmSigSSCOPConEvents
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."
VARIATION atmSigSSCOPErrdPdus
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectSetupAttempts
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitSetupAttempts
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectUnavailRoutes
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitUnavailRoutes
ACCESSnot-implemented
DESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectUnavailResrcs
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitUnavailResrcs
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectCldPtyEvents
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitCldPtyEvents
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectMsgErrors
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitMsgErrors
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectClgPtyEvents
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitClgPtyEvents
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectTimerExpireds
ACCESSnot-implementedDESCRIPTION
"The atmSigStatTable is not supported."VARIATION atmSigEmitTimerExpireds
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigDetectRestarts
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigEmitRestarts
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigInEstabls
ACCESSnot-implementedDESCRIPTION"The atmSigStatTable is not supported."VARIATION atmSigOutEstabls
ACCESSnot-implemented
DESCRIPTION"The atmSigStatTable is not supported."VARIATION atmVplLogicalPortDef
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmVplLogicalPortIndex
ACCESSnot-implementedDESCRIPTION"The atmVplLogicalPortTable is not supported."VARIATION atmInterfaceConfMaxSvpcVpi
ACCESSnot-implementedDESCRIPTION"The atmInterfaceConfMaxSvpcVpi is not supported."VARIATION atmInterfaceCurrentMaxSvpcVpi
ACCESSnot-implementedDESCRIPTION"The atmInterfaceCurrentMaxSvpcVpi is not supported."
VARIATION atmInterfaceConfMaxSvccVpi
ACCESSnot-implementedDESCRIPTION"The atmInterfaceConfMaxSvccVpi is not supported."VARIATION atmInterfaceCurrentMaxSvccVpi
ACCESSnot-implementedDESCRIPTION"The atmInterfaceCurrentMaxSvccVpi is not supported."VARIATION atmInterfaceConfMinSvccVci
ACCESSnot-implementedDESCRIPTION"The atmInterfaceConfMinSvccVci is not supported."VARIATION atmInterfaceCurrentMinSvccVci
ACCESSnot-implementedDESCRIPTION"The atmInterfaceCurrentMinSvccVci is not supported."VARIATION atmIntfSigVccRxTrafficDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmIntfSigVccRxTrafficDescrIndex is not supported."VARIATION atmIntfSigVccTxTrafficDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmIntfSigVccTxTrafficDescrIndex is not supported."VARIATION atmIntfLeafSetupFailures
ACCESSnot-implementedDESCRIPTION"The atmIntfLeafSetupFailures is not supported."VARIATION atmIntfLeafSetupRequests
ACCESSnot-implementedDESCRIPTION"The atmIntfLeafSetupRequests is not supported."VARIATION atmCurrentlyFailingPVplTimeStamp
ACCESSnot-implemented
DESCRIPTION"The atmCurrentlyFailingPVplTable is not supported."VARIATION atmCurrentlyFailingPVclTimeStamp
ACCESSnot-implementedDESCRIPTION"The atmCurrentlyFailingPVclTable is not supported."VARIATION atmVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmVclAddrRowStatus
ACCESSnot-implementedDESCRIPTION"The atmVclAddrTable is not supported."VARIATION atmAddrVclAddrType
ACCESSnot-implementedDESCRIPTION"The atmAddrVclTable is not supported."
VARIATION atmVclGenSigDescrIndex
ACCESSnot-implementedDESCRIPTION"The atmVclGenTable is not supported."SUPPORTS ATM-FORUM-SNMP-M4-MIB
INCLUDES{
atmfM4General,
atmfM4AtmLayerGroup,
atmfM4VpTestGroup,
atmfM4VcTestGroup }VARIATION atmfM4NeVersion
ACCESSnot-implementedDESCRIPTION"The atmfM4NeVersion object is not supported."VARIATION atmfM4NeStartTime
ACCESSnot-implementedDESCRIPTION"The atmfM4NeStartTime object is not supported."VARIATION atmfM4NeAlarmSeverityIndex
ACCESSnot-implementedDESCRIPTION"The atmfM4NeAlarmSeverityIndex is not supported."VARIATION atmfM4NeSuppressZeroStats
ACCESSnot-implementedDESCRIPTION"The atmfM4NeSuppressZeroStats object is not supported."VARIATION atmfM4IfType
ACCESSnot-implementedDESCRIPTION"The atmfM4IfType object is not supported."VARIATION atmfM4IfSubscriberAddress
ACCESSnot-implementedDESCRIPTION"The atmfM4IfSubscriberAddress object is not supported."VARIATION atmfM4IfPreferredCarrier
ACCESSnot-implementedDESCRIPTION
"The atmfM4IfPreferredCarrier object is not supported."VARIATION atmfM4IfFarEndCarrierNetwork
ACCESSnot-implementedDESCRIPTION"The IfFarEndCarrierNetwork object is not supported."VARIATION atmfM4VclSegEndPt
ACCESSread-onlyDESCRIPTION"An atmfM4VclEntry cannot be created/modified via SNMP."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmGroup8,
juniAtmAal5Group,
juniAtmSubIfGroup7,
juniAtmVpPingControlGroup,
juniAtmVcPingControlGroup,
juniAtmPingTrapGroup,
juniAtmSvcGroup2,
juniAtmF4OamCircuitGroup2,
juniAtmLocationGroup,
juniAtmVpStatsGroup }::={ juniAtmVccEndPointAgent 12}-- *****************************************************************************
-- ATM VP tunnel agent capabilities
-- *****************************************************************************juniAtmVpTunnelAgent OBJECTIDENTIFIER::={ juniAtmAgent 2}juniAtmVpTunnelAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the ATM VP tunnel subcomponent of the JUNOSe SNMP agent.
This version of the ATM tunnel subcomponent is supported in JUNOSe 3.0
and subsequent system releases."STATUScurrentDESCRIPTION"The MIB supported by the SNMP agent for the ATM application in JUNOSe."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmVpTunnelGroup }::={ juniAtmVpTunnelAgent 1}-- *****************************************************************************
-- ATM NBMA interface agent capabilities
-- *****************************************************************************juniAtmNbmaAgent OBJECTIDENTIFIER::={ juniAtmAgent 3}juniAtmNbmaAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the ATM NBMA interface subcomponent of the JUNOSe SNMP
agent. This version of the ATM NBMA subcomponent is supported in JUNOSe
3.2 and subsequent system releases."STATUScurrentDESCRIPTION"The MIB supported by the SNMP agent for the ATM application in JUNOSe."
SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmNbmaMapGroup }::={ juniAtmNbmaAgent 1}-- *****************************************************************************
-- ATM Switch agent capabilities
--
-- This is a placeholder for the agent capabilities for the ATM switch (cross
-- connect) subcomponent of the JUNOSe SNMP agent.
-- The ATM switch subcomponent has not been supported in a released product.
-- *****************************************************************************juniAtmSwitchAgent OBJECTIDENTIFIER::={ juniAtmAgent 4}juniAtmSwitchAgentV1 OBJECTIDENTIFIER::={ juniAtmSwitchAgent 1}-- ObsoletejuniAtmSwitchAgentV2 OBJECTIDENTIFIER::={ juniAtmSwitchAgent 2}-- Obsolete
-- *****************************************************************************
-- ATM traffic shaping agent capabilities
-- *****************************************************************************juniAtmTrafficShapingAgent OBJECTIDENTIFIER::={ juniAtmAgent 5}juniAtmTrafficShapingAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the ATM traffic shaping subcomponent of the JUNOSe SNMP
agent. This version of the ATM traffic shaping subcomponent is
supported in JUNOSe 3.3 and subsequent system releases."STATUScurrentDESCRIPTION"The MIB supported by the SNMP agent for the ATM application in JUNOSe."SUPPORTS Juniper-UNI-ATM-MIB
INCLUDES{
juniAtmTrafficShapingGroup }::={ juniAtmTrafficShapingAgent 1}END